Siemens CX203isdn - Manual (Page 85)

84
Date and Time
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / time_calendar.fm / 14.11.2005
Date and Time
Setting the date and time
The first time you make a call on your phone, the date and time are transmitted by the
exchange.
You can choose between the 12 hour and the 24 hour display (factory setting) for the
time (a.m. = 1st half of the day; p.m. = 2nd half of the day).
Activating/deactivating time display
You can activate and deactivate the display of the date and time in your base station’s
idle display.
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
s
System settings Select the menu item and confirm.
s
Date/time Select the menu item and confirm.
either ... Select display modes:
s
12 hours If necessary, choose between 12 hours - and 24 hours
display ( ‰ = on).
s
Date DD.MM If necessary, choose between Date DD.MM (Day-
Date) and Date MM.DD (Date-Day) display ( ‰ = on).
or ... Setting the date and time:
Set time
Select the menu item and confirm.
~
Enter the date and time. If necessary skip settings
that are already correct using u v.
If necessary, in the 12 hours display use the display
keys AM and PM to switch between am and pm.
W Press the display key to open the submenu.
Save entry
Select and confirm to store the setting.
OK
OK
OK
OK
OK
OK
OK
OK
i
Open the menu.
s
Settings Select the menu item and confirm.
s
Time display Select the menu item and confirm ( ‰ = on).
j
Hold down (back to idle status).
OK
OK