Siemens CX203isdn - Manual (Page 93)

92
System settings
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005
System settings
The abbreviations in brackets after the titles indicate the ISDN service concerned. Some
features may only be used if they have been authorised by the network provider (there
may be an extra charge).
Changing the name for an internal user
By factory default, all internal numbers are given the names Int.11, Int.12, etc.,
according to their numbering. You can change these entries to suit your individual
needs.
Setting up/deleting ISDN phone numbers (MSN)
Your ISDN connection offers you two telephone lines (B channels) that you can use at
the same time. You can set up a maximum of ten individual phone numbers (MSNs) on
your base station.
i
Open the menu.
s
Set base Select the menu item and confirm.
s
Settings Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
Setup user Select the menu item and confirm.
s
Setup device Select the menu item and confirm.
s
INT11: Int.11
W Select internal number and open submenu,
e.g. INT11: Int.11.
Name Confirm.
~
W Change the name and open the submenu.
Save entry
Confirm. The name is now shown in the internal list,
including when an internal call is made from this
internal number.
OK
OK
OK
OK
OK
OK
OK
i
Since names are saved in the base station, another name can be allocated
to a terminal when registering to a different base. This makes it possible
to identify which base the terminal is currently connected to.