Source Technologies SECURE MICR PRINTER ST9630 - Manual (Page 14)

Source Technologies, LLC ST9630 Secure MICR Printer User’s Guide 14
Configure the Driver to enable MICR Mode
To unlock the secure font resources located in the printer, the driver must be configured
to send down a separator page before each print job. The separator page contains the
necessary commands to unlock the resources.
1. Click Start then select the Printer and Faxes folder.
2. Locate the printer you just installed and right-click the icon. Then select
Properties.
3. From the General tab, type a descriptive name for the printer, such as
ST9620 MICR.
4. Click the Advanced tab.
5. Click the Separator Page button. Then select Browse and locate the
MICR_on.sep file in the Windows\system32 folder.
Printer and Driver Installation | 1