Source Technologies SECURE MICR PRINTER ST9630 - Manual (Page 7)

Source Technologies, LLC ST9630 Secure MICR Printer User’s Guide 7
Downloading the Universal Driver
1. Browse to the URL below from your web browser.
http://www.sourcetech.com/support/drivers.asp
2. From this page go to the section for the particular operating system you are
using such as Widows 2000, XP, etc.
3. Click on your specific model such ST9612, ST9620 etc.
4. When the File Security dialog box appears, select Save.
5. When the Save As file dialog box appears browse to a folder you have
created or to the Desktop and save the driver zip file.
6. Once the file is downloaded browse to the folder where saved and double-
click the zip file to extract the driver contents. For example, the zip file for
Windows 2000, XP, and Windows Server 2003 is:
Universal_Driver_2KXP03_x86.zip
Note : The remainder of the instructions applies to Windows XP. The exact steps
may vary depending on the particular operating system you are using.
Unzipping the Driver
1. Double-click the driver zip file to launch the unzip program installed on your
computer.
2. Follow the steps for your particular unzip program to extract the files. Make
sure the “Save with Paths” option is selected.
3. Browse to the location where you wish to extract the files, such as the
Desktop, and then extract the files.
4. The extracted zip files will be saved to the location selected in the previous
step. For example, if you saved the file to the Desktop you should now find a
new folder on the Desktop named:
Source Tech Driver
Printer and Driver Installation | 1