Source Technologies SECURE MICR PRINTER ST9630 - Manual (Page 38)

Source Technologies, LLC ST9630 Secure MICR Printer User’s Guide 38
Load Flash Resource &%STLxxxxxyyyyyyzdd....dd
&%STL Lead in sequence
xxxxx Resource number in decimal, must be 5 digits
yyyyyy Byte count of resource file in Hex, must be 6 positions
z Format of the resource file
S = Single byte binary format
D = Double byte text format
dd...dd Flash resource file. e.g. forms overlay, signatures etc.
Resource number values may be between 00001 to 32767. Values of 10000 and above
are password protected and will require the user to enter MICR mode with a valid
password before they can be unlocked with the STP command. Values below 10000 will
be unsecured.
Resource number 5001 is reserved for the Audit Trail overlay. Please see chapter 7 for
more information.
Format Flash Memory &%SFF$
&%SFF Lead in sequence
$ Command terminator
This command formats flash memory. A valid password command must precede this
command.
Caution: All flash contents will be lost. This includes all electronic forms,
signatures, logos, etc.
Secure Flash Resource Unlock Command &%STPxxxxx$
&%STP Unlock flash resource command
xxxxx Flash resource number, must be 5 digits
$ Command terminator
Unlocks a secure flash resource.
Tray Lock Command &%STTL#$
&%STTL Lock tray command
# The tray to be locked (choose from 1, 2 or 3 only)
$ Command terminator
This command prevents other applications from accessing a particular printer paper tray.
Tray Unlock Command &%STTU#$
MICR Features | 6