Preparation preparación – Samsung CAMCODER SC-D963 User Manual

Page 16

Advertising
background image

ENGLISH

ESPAÑOL

16

16

Preparation

Preparación

Using the Lithium Ion Battery Pack

✤ Use SB-LSM80 or SB-LSM160 Battery Pack only.

✤ The Battery Pack may be charged a little at the time of purchase.
Charging the Lithium Ion Battery Pack
1. Turn the [Power] switch

to [Off].

2. Attach the Battery Pack

to the Camcorder.

3. Connect the AC Power

Adapter to an AC Cord
and connect the AC
Cord to a wall socket.

4. Connect the DC cable to the DC jack on the Camcorder.

The charging indicator will start to blink, showing that the Battery is
charging.

5. Press and hold the DISPLAY button while charging

and the charging status will be displayed on the LCD
for 7 seconds.

Indicated battery level is given as reference data
for the user, it is the approximate. It may differ from
Battery capacity and temperature.

6. When the Battery is fully charged, disconnect the

Battery Pack and the AC Power Adapter from the
Camcorder. Even with the Power switched Off, the
Battery Pack will still discharge.

Charging/
Recording Times
based on Model
and Battery Type.
✤ If you close the

LCD Screen, it
switches off and the
Viewfinder switches
on automatically.

✤ The continuous recording times given in the table to the right are

approximations. Actual recording time depends on usage.

✤ The continuous recording times in the operating instructions are

measured using a fully charged Battery Pack at 77 °F (25 °C).

✤ Even when the Power switched Off, the Battery Pack will still

discharge if it is left attached to the device.

Battery

SB-LSM80

SB-LSM160

(Option)

Charging

time

Approx.

1hr 20min

Approx.

3hr

LCD On

Viewfinder On

Recording time

Time

Approx.

1hr 20min

Approx.

2hr 40min

Approx.

1hr 30min

Approx.

3hr

Blinking time

Once per second
Twice per second
Three times per second
Blinking stops and stays on
On for a second and off for
a second

Charging rate

Less than 50%
50% ~ 75%
75% ~ 90%
90% ~ 100%
Error - Reset the Battery
Pack and the DC Cable

Utilización de la batería de iones de litio

✤ Utilice únicamente la batería B-LSM80 o SB-LSM160.

✤ Es posible que la batería esté cargada sólo parcialmente al adquirir

la videocámara.

Carga de la batería
de iones de litio
1. Gire el interruptor

[Power] a [Off].

2. Conecte la batería a la

videocámara.

3. Conecte el adaptador

de CAa un cable de CAy éste a una toma de corriente.

4. Conecte el cable de CC al terminal de CC de la videocámara.

El indicador de carga comenzará a parpadear, lo cual indica que se
está cargando la batería.

5. Presione la tecla DISPLAY mientras se produce la

carga y el estado de carga aparecerá en la pantalla
LCD durante 7 segundos.

El nivel de la batería indicado que se facilita al usuario
son datos de referencia aproximados. Puede que
difiera de la capacidad y temperatura de la batería.

6. Cuando la batería esté totalmente cargada,

desconecte la batería y el adaptador de CAde la
videocámara. Incluso con la videocámara apagada,
la batería se descargará.

Tiempos de
carga/grabación
basándose en el
modelo y el tipo
de batería
✤ Si cierra la pantalla

LCD, se apaga y el
visor se enciende
automáticamente.

✤ Los tiempos de grabación continua que se facilitan en la tabla son

aproximados.
El tiempo real de grabación depende del uso de la videocámara.

✤ Los tiempos de grabación continua en las instrucciones de

funcionamiento se miden utilizando una batería totalmente cargada a
25 °C (77 °F).

✤ Incluso con la unidad apagada, la batería se descargará si se deja

conectada al dispositivo.

Frecuencia de parpadeo

Una vez por segundo
Dos veces por segundo
Tres veces por segundo
Deja de parpadear y queda encendido
Encendido durante un segundo
y apagado durante un segundo

Velocidad de carga

Menos del 50%
50% ~ 75%
75% ~ 90%
90% ~ 100%
Error – Reinicialice la
batería y el cable de CC

Battery Info

B

Ba

atttte

erryy cch

ha

arrg

ge

ed

d

0%

50%

100%

Batería

SB-LSM80

SB-LSM160

(Opcional)

Tiempo de

carga

Aprox. 1 h.

20 min.

Aprox. 3 h.

LCD ENCENDIDA Visor encendido

Tiempo de grabación

Tiempo

Aprox. 1 h.

20 min.

Aprox. 2 h.

40 min.

Aprox. 1 h.

30 min.

Aprox. 3 h.

0???? SCD963 USA+ESP ~048 2/21/06 8:41 PM Page 16

Advertising
This manual is related to the following products: