Menu reset – Sony AEP MODEL CPD-E200E User Manual
Page 11
1-7
16
Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer, the screen will go
blank and the
1 (power) indicator will either light up green or
flash orange. If the
1 (power) indicator is lit in orange, the
computer is in power saving mode. Try pressing any key on the
keyboard.
If the
1
(power) indicator is green
1 Disconnect the video input cable or turn off the
connected computer.
2 Press the
1
(power) button twice to turn the monitor
off and then on.
3 Move the control button
,
for 2 seconds before the
monitor enters power saving mode.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cable and check
the condition of your computer.
If the color bars do not appear, there is a potential monitor failure.
Inform your authorized Sony dealer of the monitor’s condition.
If the
1
(power) indicator is flashing orange
Press the
1
(power) button twice to turn the monitor off
and then on.
If the
1 (power) indicator lights up green, the monitor is working
properly.
If the
1 (power) indicator is still flashing, there is a potential
monitor failure. Count the number of seconds between orange
flashes of the
1 (power) indicator and inform your authorized
Sony dealer of the monitor’s condition. Be sure to note the model
name and serial number of your monitor. Also note the make and
model of your computer and video board.
MENU
RESET
1
(power) indicator
MENU