Sunfire TGP-5 - Manual (Page 30)

User's Manual
30
CHAPTER 4
On Screen Display (OSD)
Video Connections
The On Screen Display (OSD) is
present at the composite video
or S-video MAIN outputs, and the
component video MAIN and MON
outputs. It is also present at the
output labeled VID2/MON2, but
only if it is set to MON2. This is
set in the OSD Video menu (see
page 37). Make sure that your TV
monitor's video input is connected
correctly to one of these outputs.
Note that the HDMI output does
not support OSD functions.
OSD Activation
The OSD is activated using the
remote's MENU button (with the
remote set to operate the TGP-5).
The joystick pad and surround-
ing buttons allow you to navigate
through the OSD menus to control
and customize many features of
the TGP-5.
Press EXIT to quit the OSD at any
time. Any changes you make will
be saved.
Note that the TGP-5 front panel
display shows abbreviated text
when the OSD is activated.
MAIN MON2 No OSD from:
• VCR outputs
• VID2/MON2 set to VID2
• HDMI output
GUIDE MENU
MODE MODE
EXIT INFO
Quick Information
Pressing INFO at any time will
bring up a short description of the
source you are listening to. For
example if you are listening to a
DVD, the TV display might show:
DVD DIGITAL 48K
DOLBY EX 5.1 / 5.1
where:
DVD is the selected input,
DIGITAL is the signal type,
48K is the sample rate,
DOLBY EX is the mode,
5.1 is the input format,
5.1 is the output (i.e. fi ve
speakers and a subwoofer).
MAIN MON2