Recording, Chapter 5, Recording to a tape player – Sunfire TGP-5 User Manual

Page 46: Recording to a vcr, User's manual

Advertising
background image

User's Manual

46

CHAPTER 5

Recording

Recording to a Tape Player

Input signals from an audio source playing in

the TGP-5 can be re cord ed using the left and
right audio outputs. The tape player will receive
a straight copy of the analog source signal going
in, un af fect ed by the volume, tone or any sur-
round modes. If you are playing a digital source,
the tape player will receive a downmixed stereo
analog signal for recording.

• Turn OFF the Fully Automatic mode. This

is because some tape decks, such as
three-head decks, will have an out-
put signal going into the TGP-5 during
recording. The DAT or TAPE inputs may
be in cor rect ly se lect ed as an input, rather
than the source you are trying to record.

• Manually select the source such as CD

and play it through your system.

• Set your tape player to record and adjust

the input levels for the best per for mance.
Once the levels are correct, you can reset
your source to the beginning and make
your re cord ing.

• Do not select another Main Zone input

while you are recording.

Recording to a VCR

Any video source playing in the TGP-5 can be

re cord ed using the left and right audio and the
video outputs. The VCR will receive a straight
copy of the source signal going in, unaffected by
the volume, tone or any surround modes.

• Select the video source and play it

through your system.

• Set your VCR to record.

• Do not select another Main Zone source

while you are recording.

• The VID2/MON2 output can also be used

for recording, but fi rst make sure that it
is set to VID2 in the VIDEO menu of the
OSD (see page 37). This output will then
mute to prevent feedback whenever the
VID2 input source is selected.

• Do not use the OSD while recording as

the incoming video is shut off while the
OSD is displayed

DVD

MANUF

SYSTEM

5,978,76

PENDIN

"NEO:6

SYSTEM

SYSTEM

MANUFACTURED UND

ER LICENSE

FROM DOLBY LABORATORIES.
"DOLBY", "PRO-LOG

IC" AND THE

DOUBLE-D SYMBOL ARE

TRADEMAR

KS OF DOLBY

LABORATO

RIES.

RECORD
From TGP-5
TAPE outputs

PLAY
To TGP-5
TAPE inputs

RECORD
From TGP-5
VCR outputs

PLAY
To TGP-5
VCR inputs

Advertising