Tuner operation, Chapter 5, Tuner and the osd – Sunfire TGP-5 User Manual

Page 45: Tuning stations manually, Recalling a preset station, Scanning presets, Saving presets

Advertising
background image

User's Manual

45

CHAPTER 5

Tuner Operation

The Tuner is se lect ed either by

rotating the manual input selector on
the front panel, or by touching the
TUNER button in the re mote’s TGP-5
mode. The front panel display shows
the frequency of the last station you
were lis ten ing to.

The FM Tuner can tune sta tions

from 87.5 MHz to 108.0 MHz in 0.2
MHz steps (.05 MHz steps for some
in ter na tion al mod els). The AM Tuner
range is 530 kHz to 1710 kHz in 10
kHz steps (531 kHz to 1710 kHz in
9 kHz steps for some in ter na tion al
models).

Tuner and the OSD

Page 35 shows how to set up the

Tuner using the on screen display.

Tuning Stations Manually

Use the front panel AM/FM button

to select either the AM or FM band,
and then use one of these three ways
to tune stations manually:

1. Touch UP or DOWN mo men -

tari ly to change the tuner by
one frequency step.

2. Hold UP or DOWN for a

second or so, then release to
start the scanning feature. The
TGP-5 will scan to the next
station, pause on it for a few
seconds to allow you to hear
what is offered there, and then
scan to the next, and so on.
Press ing UP or DOWN stops
the scanning process.

3. Hold UP or DOWN for an

extended period to make the
tuner speed across the band
without stopping on a station.
The tuner will begin scanning
for stations when you release
the button. Press ing UP or
DOWN stops the scanning.

4. When a station is tuned, it can

be set as a preset for easy re-
call, see "Setting the Presets"
in the next column.

Recalling a Preset Station

Once you have selected the Tuner,

you can quickly recall a station by
press ing its preset number, either on
the remote’s numeric keypad, FAV
buttons, or the channel up and down
buttons.

Scanning Presets

To scan through the presets, press

and hold the FM/AM button. Touch it
again to stop the scan.

Saving Presets:

1. Navigate to your favorite station

with the UP/DOWN buttons.

2. Press MEMORY once. The

preset choice will go to the next
available one.

3. Within 5 seconds, press

MEMORY again to save the
current frequency as a preset,
or else use the UP/DOWN
buttons to fi nd another preset
number, then press MEMORY
to save it.

4. The UP/DOWN buttons usually

tune the frequency, but when
loading the presets, they navi-
gate the presets.

Preset

Station

AM FM NR

1
2
3
4
5
6
7
8
9

10

11

12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40

Record your favorite stations here:

Advertising