Sony CDX-C90R - Manual (Page 39)

Radio 39
GB
Radio
Selecting stations with the strongest
signals (BTM)
BTM (Best Tuning Memory) is a function that selects the
radio stations with the strongest signals and automatically
sets them to preset station numbers.
If you activate the BTM function while listening to an FM
broadcast with the AF function turned on (see page 35)
and the TA function turned off (see page 43), the unit
presets only the FM RDS stations.
If the TA function is on, the stations that broadcast traffic
announcements only are preset.
When both the AF and TA functions are set to off, or while
you’re listening to the MW or LW broadcast, the unit
presets the stations with the strongest signals in your area.
If you activate the BTM function while listening to a preset
station, the unit replaces only those stations on preset
numbers higher than the current one.
If you activate the function while listening to a station
which is not preset, all the contents of the preset stations
will be replaced.
1
While listening to an FM, MW or LW
broadcast, press and hold DSPL/PTY for two
seconds to display BTM/MONO/LCL.
2
Press BTM.
The unit selects the station with the strongest signals
and memorises them in the order of their frequencies.
A beep sounds after storing the stations and the unit
returns to the normal display.
Selecting the mode with the wireless remote
While listening to FM, MW or LW, press MENU and set
the Preset mode to “BTM.”
OPEN DSPL
8 9 10 7 6
B T M
M O N O
L C L
BTM
DSPL/PTY
PTY
Note
If the radio can only
tune in a few stations or
receives only weak
frequencies, the BTM
function may not assign
frequencies to all the
preset station numbers.