Sony CDX-C90R - Manual (Page 40)

40
Radio
GB
Presetting the RDS stations with AF and
TA data
When you preset RDS stations, the unit stores each
station’s data as well as its frequency, so you don’t have to
turn on the AF or TA function every time you tune in these
preset stations. You can select a different setting (AF, TA,
or both) for each preset station, or the same setting for all
preset stations.
Making the same setting for all preset stations
1
While listening to an FM broadcast, press
MENU.
2
Select “R.Mode” and press / to move to the
sub menu, then select “Preset” by pressing >
or ..
3
Press / then > or . to select “BTM,” then
press ENTER.
Making different settings for each preset station
1
While listening to the desired FM broadcast,
press AF or TA to set the mode to “on” or “off.”
2
Press and hold the desired number button (1
to 10).
When you assign stations to the preset numbers 11 to
20, use manual preset (see page 37.)
Repeat steps 1 and 2 to preset other stations.
Note
If you want to change the preset AF and/or TA setting after you
tune in the preset station, you can do so by turning on/off the AF
or TA function.
Note
You can change the AF
or TA setting for any
preset station that you
are listening to.
L o c a l o f f
M o n o / S t e r e o
D i s p l a y
P r e s e t
s t e r e o
m a n u a l
B T M
S e t u p
R . M o d e
R D S