Sierra Wireless RJ-11 - Manual (Page 16)

Rev 3.0 B 2/15/08 11
In DHCP Mode, the RJ‐11 IP Gateway will receive its IP
address from the modem.This is the default configuration for
the RJ‐11 IP Gateway. If you are using the default Public Mode
settings for the Raven X, use DHCP mode.
The IPv4 Address and the IPv4 Netmask should be listed as
0.0.0.0. (The current IP address and current netmask listed
above the entry boxes is received from the modem in DHCP
mode. It is for display only.)
Figure 2-8: RJ-11 IP Gateway: Network Interface Settings )
Figure 2-9: Host RJ-11 IP Gateway: Network Interface Settings
192.168.1.3
255.255.255.0