Sierra Wireless RJ-11 - Manual (Page 40)

Rev 3.0 B 2/15/08 35
The current routing table is also displayed on this page for
your reference.
Time Settings
The Time Settings page allows you to configure NTP or HTTP
time‐servers to get the system time from. If you are using SSL
for peer verification, the device server must obtain a valid time
from an external time‐server to verify the peer.
Time is used in the system and other logs. Having the correct
time can help to troubleshoot problems or simply to track
occurrences of particular events.
The current time is expressed in UTC (Coordinated Universal
Time).
Figure 2-11: Host RJ-11 IP Gateway: Time Settings