Sennheiser SKM100 - Manual (Page 22)

21
Adjusting settings via the operating menu
The following figures are a guide to the best settings:
Selecting the frequency bank and the channel manually –
“Frequency Preset”
Overview of the frequency banks and channels:
Entering a name – “Name”
Via the “ Name ” menu, you can enter a freely selectable
name (e.g. the name of the performer) for the radio micro-
phone.
Transmission situation Sensitivity setting
Loud music/vocals
−48 to −18 dB
Presentations
−18 to −12 dB
Interviews
−12 to 0 dB
When you are in the “ Frequency Preset ” menu item,
the RF signal is deactivated.
Frequency
bank
Channels Type
“ 1 ” to “ 20 ” up to 12 per
frequency
bank System bank:
frequencies are factory-
preset
“ U ” up to 12 User bank:
frequencies are freely
selectable
When setting up multi-channel systems, please
observe the following:
Only the factory-preset frequencies within one
frequency bank are intermodulation-free (see
page 25).
Radio microphone and receiver of a transmission
link have to be set to the same frequency.
̈
It is vital to observe the notes on frequency
selection on page 25.
Menu
B.Ch: 1. 1
B.Ch:
MHz
Frequency Preset
Frequency Preset 1 . 1 B.Ch:
MHz
Frequency
20. 1
516.200 533.875
Call up “Frequency
Preset” Select the frequency
bank and confirm Select the channel;
store the setting
“Stored”
Menu
Lichael
Name
Name Name
L ichael M i chael
Call up “Name” Enter a character
and confirm Enter a character;
store the setting
“Stored”