Sennheiser SKM100 - Manual (Page 24)

23
Adjusting settings via the operating menu
Setting a transmission frequency for the current channel
̈
Set the desired frequency.
Selecting a channel and assigning this channel a
frequency
̈
Set the desired channel.
̈
Set the desired frequency.
It is vital to observe the notes on frequency
selection on page 25
̈
Move the multi-function switch until the “ Tune ”
menu item appears.
̈
Press the multi-function switch.
The frequency selection appears.
̈
Press the multi-function switch.
Your settings are stored.
You are back to the operating menu.
̈
Move the multi-function switch until the “ Tune ”
menu item appears.
̈
Press the multi-function switch until the channel
selection appears.
̈
Press the multi-function switch.
The frequency selection appears.
̈
Press the multi-function switch.
Your settings are stored.
You are back to the operating menu.
533 .875 MHz
Tune
534. 875 MHz
B.Ch: U. 1 B.Ch: U. 1
Tune Advanced Menu
Tune
533.875 MHz
Select the MHz
value and confirm Select the kHz
value; store the
setting Call up “Tune”
“Stored”
543.200 MHz
Tu n e
B.Ch: U. 1 B.Ch: U. 1
Tu n e Advanced Menu
Tune
543.200 MHz
543 .200 MHz
Call up “Tune”
(special function)
“Stored”
Select the channel;
store the setting Set the
frequency