Sennheiser SKM100 - Manual (Page 25)

24
Adjusting settings via the operating menu
Activating/deactivating the pilot tone transmission –
“Pilot Tone”
The radio microphone adds an inaudible signal, known as
the pilot tone, to the transmitted signal. The receiver
detects and evaluates the pilot tone.
The pilot tone supports the receiver’s squelch function
(Squelch) and protects against interference due to
RF signals from other devices.
Devices of the ew 100 G1 series (generation 1) do not
support the pilot tone function. Therefore, please observe
the following when combining a radio microphone or
receiver of the ew 100 G3 series (generation 3) with
devices from an earlier evolution wireless generation:
Adjusting the contrast of the display panel –
“LCD Contrast“
You can adjust the contrast of the display panel in 16 steps.
Resetting the settings made in the operating menu –
“Reset”
When resetting the settings made in the operating menu,
only the selected settings for the pilot tone and for the
frequency bank “
U ” remain unchanged.
For an overview of the factory-preset default settings, refer
to the supplied frequency information sheet.
Displaying the software revision – “Software Revision”
You can display the current software revision of the radio
microphone.
Radio
microphone
Receiver Make sure to ...
w G3/ w G2 w G3/ w G2 ... activate the pilot
tone function on both
radio microphone and
receiver.
w G3 w G1 ... deactivate the pilot
tone function on the
ew 100 G3 radio
microphone.
w G1 w G3 ... deactivate the pilot
tone function on the
ew 100 G3 receiver.
Name
Advanced Menu
Pilot Tone Active
Active
Pilot Tone
Inactive
Pilot Tone
Call up
“Pilot Tone” Select the desired
setting Store the setting
“Stored”
Advanced Menu
Reset Yes
Reset
Select the desired
setting; apply the
setting Call up “Reset”
“Stored”