Sharp VL-WD450U - Manual (Page 29)

14
Preparation
ENGL I SH
L ANGUAGE
F RAN Ç A I S
E S PA Ñ OL
REMO T E
SOUND
T I ME CODE
T C OUT
DEMO MODE
L ANGUAGE ENGL I SH
OT HERS
S E T [ BUT TON]
Selecting the Language for
the On-screen Display
This camcorder allows you to choose from
among English, French or Spanish for the on-
screen display language.
MENU/DISPLAY button
Power switch
Note:
• The operation procedures in the following
sections of this operation manual are based
on the use of on-screen displays in English.
Operation button
Setting the Language
When using the camcorder for the first time,
select the desired language for the on-screen
display by performing the procedure below.
LCD monitor
OPEN release
button
1
Press the LCD monitor OPEN release
button (
1 ) and open the LCD monitor
( 2 ).
3
Press d or y ( 1 ) on the operation
button to select the desired language,
then press
e ( 2 ).
Changing the Language
1
Set the camcorder to TAPE-CAMERA or
CARD-CAMERA mode.
2
Press the MENU/DISPLAY button until
the menu screen appears.
3
Select I , then press r on the
Operation button. Select “LANGUAGE”
(“LANGUE” or “IDIOMA”) (
1 ), then
press r ( 2 ).
• The language selection screen appears.
4
Perform step 3 in “Setting the
Language”.
• The menu screen is displayed in the
language selected.
ENGL I SH
L ANGUAGE
F RAN Ç A I S
E S PA Ñ OL
REMO T E
SOUND
T I ME CODE
T C OUT
DEMO MODE
L ANGUAGE ENGL I SH
OT HERS
S E T [ BUT TON]
2
Hold down the Lock button
and set the Power switch to
CAMERA.
• The language selection screen
appears on the LCD screen.
Lock button
5
Press the MENU/DISPLAY button to
turn off the menu screen.