White bal. (white balance) – Sony 4-191-794-11(1) User Manual
Page 85
C
ust
omizing y
our camc
or
der
GB
WHITE FADER
Fades in/out with the white effect.
Out
In
BLACK FADER
Fades in/out with the black effect.
Out
In
To cancel the fader before starting the
operation, touch [OFF].
Tips
When you press START/STOP, the setting is
cleared.
A movie recorded using [BLACK FADER] may
be difficult to see in the VISUAL INDEX screen.
WHITE BAL. (White balance)
You can adjust the color balance to the
brightness of the recording environment.
AUTO
The white balance is adjusted automatically.
OUTDOOR ( )
The white balance is appropriately adjusted
for the following recording conditions:
Outdoors
Night views, neon signs and fireworks
Sunrise or sunset
Under daylight fluorescent lamps
INDOOR ()
The white balance is appropriately adjusted
for the following recording conditions:
Indoors
At party scenes or studios where the
lighting conditions change quickly
Under video lamps in a studio, or under
sodium lamps or incandescent-like color
lamps
ONE PUSH (
)
The white balance will be adjusted
according to the ambient light.
Touch [ONE PUSH].
Frame a white object such as a piece of
paper, to fill the screen under the same
lighting conditions as you will shoot the
subject.
Touch [
].
flashes quickly. When the white
balance has been adjusted and stored in the
memory, the indicator stops flashing.
Notes
Set [WHITE BAL.] to [AUTO] or adjust the
color in [ONE PUSH] under white or cool
white fluorescent lamps.
When you select [ONE PUSH], keep framing
white objects while
is flashing quickly.
flashes slowly if [ONE PUSH] could not
be set.
When [ONE PUSH] was selected, if
keeps
flashing after touching
, set [WHITE
BAL.] to [AUTO].
If you set [WHITE BAL.], [SCENE
SELECTION] is set to [AUTO].
Tips
If you have changed the battery pack while
[AUTO] was selected, or taken your camcorder
outdoors after inside use (or vice versa), aim
your camcorder at a nearby white object for
about 10 seconds for better color balance
adjustment.
When the white balance has been set with
[ONE PUSH], if the lighting conditions
changed by bringing your camcorder outdoors