Face detection, Conversion lens, Low lux – Sony 4-191-794-11(1) User Manual

Page 90

Advertising
background image

0

GB

dim light.

 OFF

The LOW LUX function is not used.

ON ( )

The LOW LUX function is used.

FACE DETECTION

Detects the faces of your subjects

and adjusts the focus/color/exposure

automatically. Also, it adjusts the image

quality of face parts more finely, in the case

of the high definition image quality (HD)

movies.

 ON

Detects faces.

OFF ( )

Does not detect faces.

Notes

Faces may not be detected depending on

recording conditions, subject conditions, and

the setting of your camcorder.

[FACE DETECTION] may not function

properly depending on recording conditions.

Set [FACE DETECTION] to [OFF] in this case.

Tips

For better face detection performance, shoot the

subject(s) under the following conditions:

Shoot in a sufficiently bright place

The subject(s) does not wear glasses, a hat

or mask

The subject(s) faces directly towards the

camera

The detected faces are recorded in Face Index,

however, some faces may not be. Also, there

is a limit to the number of faces that can be

recorded in Face Index. To play back from the

Face Index, see page 39.


when using a tripod (sold separately), then

the image becomes natural.

 ACTIVE

Provides a more powerful SteadyShot effect.

STANDARD

Provides the SteadyShot effect under relatively

stable recording conditions.

OFF (

)

The SteadyShot function is not used.

Notes

If you change the setting of

[ STEADYSHOT], the imaging field will also

change accordingly.

You can magnify images up to 10 times using

optical zooming, unless [ STEADYSHOT] is

set to [ACTIVE].

CONVERSION LENS

When using a conversion lens (sold

separately), use this function to record

using the optimum compensation for

camera shake and focus for the lens.

 OFF

Select this when you do not use a conversion

lens.

WIDE CONVERSION ( )

Select this when you use a wide-conversion

lens.

TELE CONVERSION ( )

Select this when you use a tele-conversion

lens.

Note

The flash is not flashed when [CONVERSION

LENS] is set to other than [OFF], you cannot

also set [FLASH MODE] (p. 94).

LOW LUX

You can record bright color images, even in

Advertising