Sanyo DVD-SL25 - Manual (Page 14)

-E13-
q
n a e f
z /ON
5 1 2, 4 3
z /ON
NEXT PREV
FWD SLOW REV SLOW
PAUSE/STEP
PLAY
REV FWD
CLEAR
1 2 3 C
4
b
5
a ENT
SETUP MENU
AUDIO RETURN
PICTURE
MODE
ANGLE
REPLAY ZOOM ANGLE
LAST MEMO
SURROUND
ON SCREEN
OPEN/CLOSE
REPEAT A-B REPEAT
SUBTITLE
CHANGE
SUBTITLE
ON/OFF
1 2, 4
5
TOP MENU
PROGRAM /RANDOM
VIDEO
4:3 LB
(Letterbox): 4:3 PS
(Panscan): 16:9 :
BASIC OPERATION
Preparations
• Turn on the power (TV, Audio System, AV amplifier, etc.).
• Select the video input source from your television.
(Please refer to your TV instruction manual.)
Important Note:
• This instruction manual explains the basic instruction of this
unit using the remote control.
• Some DVD video discs have different functions that may
not be explained in this instruction manual. You may need
extra instructions. In this case, please follow the instructions
displayed on the TV screen or jacket or case of the disc.
• “ ” may appear on the TV screen during operation. This
icon means that the function is not available on the disc
now.
• For improvement, FL displays and on-screen displays
subject to change without notice.
• Select the playback picture size according to the aspect ratio
of the TV. (For more details, see “Setting Display” on page
E28.)
TV
• Select the audio input source (Audio System, AV amplifier,
etc.).
• When the DVD video player is connected to the
COMPONENT VIDEO OUT jacks of the TV (see pages E6,
E8, and E9), you must select the INTERLACE or
PROGRESSIVE position.
Note: Initial setting is “INTERLACE”.
1. Turn on the power (TV and DVD video player).
2. In “No Disc” mode, press and hold down [
a ] on the DVD
video player until “ ” (INTERLACE) or “ ”
(PROGRESSIVE) appears on the TV screen.
Conventional TV: Select “ ”.
TV with Progressive-scan Capability: Select “ ”.
Note:
In “ ” mode, the closed caption may not appear on
the TV screen.
Basic Playback
Notes:
•
Do not touch the disc tray while it is moving.
• Never place anything except a disc on the disc tray. Foreign
objects can damage the unit.
• Do not apply excessive force to the disc tray.
• Discs must be placed on the disc tray one at a time.
When operation buttons are pressed, that operation is displayed
on the TV screen. The display turns off after several seconds.
1. Press [ z /ON].
• “SANYO” logo appears on the TV screen.
• “------” blinks, and then “NO dISC” appears on the FL
display.
2. Press [ q ] (or [OPEN/CLOSE] on the remote control).
• “OPEN” appears on the FL display and the disc tray
opens.
Note:
To open or close the disc tray, be sure to press [
q ] (or
[OPEN/CLOSE] on the remote control). Do not press the disc
tray with your hand.
3. Place the disc with the label facing up on the disc tray.
or
For 5-inch (12cm) disc For 3-inch (8cm) disc