Sanyo DVD-SL25 - Manual (Page 19)

-E18-
NEXT PREV
FWD SLOW REV SLOW
PAUSE/STEP
PLAY
REV FWD
CLEAR
SEARCH
MODE
1 2 3 C
4 5 6
7 8 9
0
4
b
5
a ENT
SETUP MENU
AUDIO RETURN
ANGLE
REPLAY ZOOM ANGLE
SURROUND
ON SCREEN
REPEAT A-B REPEAT
SUBTITLE
CHANGE
SUBTITLE
ON/OFF
TOP MENU
PROGRAM
/RANDOM
4 , a , 5 , b
ZOOM
Number
button
ENT
z /ON
FWD SLOW REV SLOW
4
b
5
a ENT
SETUP MENU
AUDIO RETURN
PICTURE
MODE
ANGLE
REPLAY ZOOM ANGLE
LAST MEMO
SURROUND
ON SCREEN
OPEN/CLOSE
REPEAT A-B REPEAT
SUBTITLE
CHANGE
SUBTITLE
ON/OFF
TOP MENU
PROGRAM
/RANDOM
ANGLE
ANGLE
REPLAY
1 2 3
4 5 6
7 8 9
3
Viewing from a Desired Camera Angle
(Multi-Angle) [DVD]
Picture Zoom (Pin Point Zoom) [DVD]
1. Press [ZOOM] during normal/slow playback or still picture.
The pin point guide appears on the TV screen.
The guide divides the screen into nine, and the number
shows the point.
Note:
If you quit the screen, press [ZOOM].
2. To select the point, do one of the following:
• Press [ o ], [ a ], [ p ] or [ b ], and press [ENT].
• Press the number button.
• The screen is magnified.
• “ 1” appears briefly on the TV screen.
• If necessary, press [ o ], [ a ], [ p ] or [ b ] repeatedly to move
the screen as desired.
3/5
Some DVD video discs may contain scenes which have been
shot simultaneously from a number of different camera angles.
The jacket or case of discs that are recorded with angles will be
marked.
Example:
Note:
The recorded angles differ depending on the disc used.
1. Play the disc that is recorded with angles.
2. Press [ANGLE] repeatedly until the desired angle appears.
Example:
Angle Replay
During Multi-angle playback screen, press [ANGLE REPLAY].
The unit skips back to last approximately 10 seconds, changes it
to the next camera angle and plays it, and continues playback.
If desired, press the button again.
3. Press [ZOOM] again.
• The screen is magnified more than “ 1”.
• “ 2” appears briefly on the TV screen.
• If necessary, press [ o ], [ a ], [ p ] or [ b ] repeatedly to move
the screen as desired.
4. Press [ZOOM] to return to the original screen.
• “ Off” appears briefly on the TV screen.
Note:
Pin Point Zoom may not work on some discs.
Important Note:
“ ” may appear on the TV screen during operation. This icon
means that the function is not available on the disc now.