Sanyo DVD-SL25 - Manual (Page 29)

-E28-
z /ON
NEXT PREV
FWD SLOW REV SLOW
PAUSE/STEP
PLAY
REV FWD
CLEAR
SEARCH
MODE
1 2 3 C
4 5 6
7 8 9
0
4
b
5
a ENT
SETUP MENU
AUDIO RETURN
PICTURE
MODE
ANGLE
REPLAY ZOOM ANGLE
LAST MEMO
SURROUND
ON SCREEN
OPEN/CLOSE
REPEAT A-B REPEAT
SUBTITLE
CHANGE
SUBTITLE
ON/OFF
TOP MENU
PROGRAM /RANDOM
SETUP
ENT
p
o
a
Language Display Digital Out Parental
Language Display Digital Out Parental
Dimmer
TV Type Normal
4:3 LB
Dimmer
TV Type Normal
4:3 LB
Normal
Dark
Dimmer
TV Type Drak
4:3 LB 4:3 LB
4:3 PS
16:9
Dimmer
TV Type Drak
4:3 LB 4:3 LB
4:3 PS
16:9
Dimmer
TV Type Normal
4:3 LB
Normal
Dark
Setting Display
1. Press [SETUP] in the stop mode.
The setup screen appears.
Cut off Cut off
4:3 LB (Letterbox):
Select when a conventional TV set is
connected.
When the wide screen disc is played
back, the black bands appear at the
top and bottom of screen.
4:3 PS (Panscan):
Select when a conventional TV set is
connected.
When the wide screen disc is played
back, it displays pictures cropped to
fill to your TV screen. The left and
right edges are cut off.
16:9 :
Select when a wide screen TV set is
connected.
Played in “FULL” size. (Setting the
wide screen TV to “FULL” mode is
also necessary.)
Notes:
•
The screen size may differ depending on the DVD video
discs.
• If you select 16:9 to get rid of the black bands on screen
when wide screen disc is played back, picture may be
slightly distorted.
• In some discs, even if 4:3 PS is selected, the black bands
may remain on the screen.
2. Press [ a ] to select “Display”.
3. Press [ENT].
“Display” screen appears.
4. Press [ENT] again.
The submenu (FL display brightness on the player, “Normal”
and “Dark”) appears.
5. Press [ p ] or [ o ] to select the FL display brightness.
Example: To select “Dark”
6. Press [ENT].
(In this example, “Dimmer Dark” remains.)
7. Press [ p ] to select “TV Type”.
8. Press [ENT].
The submenu (“4:3 LB”, “4:3 PS” and “16:9”) appears.
9. Press [ p ] or [ o ] to select the appropriate setting for your TV
screen size.
Example: To select “4:3 PS”
10. Press [ENT].
(In this example, “TV Type 4:3 PS” remains.)
11. Press [ o ] to skip back to the setup screen (or press [SETUP]).