Sanyo DVD-SL25 - Manual (Page 31)

-E30-
NEXT PREV
FWD SLOW REV SLOW
PAUSE/STEP
PLAY
REV FWD
CLEAR
SEARCH
MODE
1 2 3 C
4 5 6
7 8 9
0
4
b
5
a ENT
SETUP MENU
AUDIO RETURN
ANGLE
REPLAY ZOOM ANGLE ON SCREEN
SUBTITLE
CHANGE
SUBTITLE
ON/OFF
TOP MENU
SETUP
o
a
p
Number
buttons
ENT
CLEAR
Language Display Digital Out Parental
Language Display Digital Out Parental
Password
Level ----
Off
Password
Level
1
Password
Level ----
1
Password
Level ----
Off
Password
Level ----
1
Setting Parental
1. Press [SETUP] in the stop mode.
The setup screen appears.
2. Press [ a ] to select “Parental”.
3. Press [ENT].
“Parental” screen appears.
4. Press [ p ] to skip “Password ----” and select “Level”.
5. Press [ENT] repeatedly to select the parental lock level
(“Level Off” ~ “Level 8”).
Example: To select “Level 1”
6. Press [ o ] to return to “Password ----”.
7. Enter a number in 4 digits.
Parental Control
MPAA (Motion Picture Association of America) Guideline is a
rating system that provides advanced cautionary information to
parent about the content of movie programs.
The parental lock level is equivalent to the following MPAA
Rating System.
Level 7: NC-17 (No one 17 and under admitted)
Level 6: R (Restricted)
Level 4: PG-13 (Parents strongly cautioned)
Level 3: PG (Parental guidance suggested)
Level 1: G (General audiences)
Some DVD discs contain a restriction level which enables
parents to prevent playback of discs by children. This unit is
equipped with a password designed to prevent children changing
the level.
You cannot play DVD video discs rated higher than the level
you selected unless you cancel the parental lock function.
For example, when you select level “5”, the unit will not play
discs with ratings of “6”, “7” or “8”.
The information will appear on the TV screen.
If you forget the password…
Enter “788444” even if 4 digits “----” appears, then press [ENT]
to clear the current password.
Enter a new password and set the parental lock level again.
Note:
DVD video discs may or may not respond to the parental lock
settings. Make sure this function works with your DVD video
discs.
Note:
If you make a mistake, press [CLEAR].
8. Press [ENT].
The password is now set.
Note:
If you do not set it, Parental Control does not work, and it
returns to the initial settings.
9. Press [SETUP].
The setup screen disappears.