Sony Ericsson CDP-CX270 - Manual (Page 18)

18
Playing CDs
Playing in Random Order
(Shuffle Play)
You can have the player “shuffle” the tracks and play
in random order. The player shuffles all the tracks on
all discs or on the disc you specified.
JOG SHUFFLE
·
1 Press SHUFFLE to select ALL DISCS or 1 DISC
Shuffle Play mode.
Each time you press SHUFFLE, “ALL DISCS” or
“1 DISC” appears in the front panel display.
When you select
ALL DISCS
1␣ DISC
2
When you want to specify the disc for 1 DISC
Shuffle Play, turn the JOG dial until the disc
number or disc title (see page 23) you want
appears in the front panel display.
3 Press ENTER or ·.
ALL DISCS or 1␣ DISC Shuffle Play starts.
“
” appears in the front panel display while the
player is “shuffling” the discs or the tracks.
To cancel Shuffle Play
Press CONTINUE.
You can start Shuffle Play while playing
Press SHUFFLE, and Shuffle Play starts from the current
track.
You can directly select a disc for 1 DISC Shuffle Play
See “Selecting a disc directly using the remote” on page 13.
The player plays
All tracks on all discs in
random order. When
connected to the second
player, the player selects the
tracks from both this player
and the second player.
All tracks on the selected disc
in random order
ENTER
You can go to the next disc during 1␣ DISC Shuffle Play
Press DISC SKIP +.
You can specify the next disc to play during 1␣ DISC
Shuffle Play
Turn the JOG dial to specify the next disc. After all the
tracks on the current disc are played in random order,
the next disc starts playing. If you want to skip to the
next disc right away, press ENTER while playing the
current disc.
Notes
• You cannot specify the next disc to play during ALL DISCS
Shuffle Play.
• Even if you press the p button or turn off the player during
ALL DISCS Shuffle Play, the player remembers which
discs/tracks were played and which were not. Therefore, if
you want to start ALL DISCS Shuffle Play again from the
beginning, be sure to repeat the procedure from Step 1.
·
CLEAR CHECK
Creating Your Own Program
(Program Play)
You can arrange the order of the tracks and/or discs to
create three different programs and the programs are
stored automatically. A␣ program can contain up to 32
“steps” — one “step” may contain a track or a whole
disc.
You can also create programs by different procedure
using the remote. You can use both the front panel and
the on-screen display information when programming
in either procedure.
Creating a program on the player
JOG PROGRAM ENTER ≠/±