Disc-2o, 2o all 1, 2o 3 1 – Sony Ericsson CDP-CX270 User Manual

Page 19: Disc, Playing cds getting started, Playing cds 1, Creating a program using the remote z 3

Advertising
background image

Playing CDs

Getting Started

19

Playing CDs

1

Press PROGRAM until the program number you
want (PROGRAM␣ 1, 2 or 3) appears in the front
panel display.
If a program is already stored in the selected
program number, the last step of the program
appears in the front panel display. When you want
to erase the whole program, hold down CLEAR
until “ALL CLEAR” appears in the front panel
display (see page 20).

2

Turn the JOG dial until the disc number you want
appears in the front panel display.

The programs remain even after Program Play ends

When you press the · button, you can play the same
program again.

When you press PROGRAM during Continuous or

Shuffle Play

The program will be played after the current track.

The programs remain until you erase them

If you replace discs, the programmed disc and track
numbers remain. So, the player plays only the existing
disc and track numbers. However, the disc and track
numbers that are not found in the player or on the disc
are deleted from the program, and the rest of the
program is played in the programmed order.

When connected to the second player, you can

program tracks/discs of both players in the same
program

When selecting a disc, press PLAYER SELECT repeatedly
until “2nd PLAYER” appears in the front panel display.
Then select the disc you want to program.

Creating a program using the remote Z

3

To program a whole disc, skip this step. Press
≠/± until the track number you want
appears in the front panel display.

Track number

4

Press ENTER or PROGRAM.

The track being programmed

Playing order

The disc being
programmed

5

To program other discs/tracks, do the following:

To program

Other discs

Other tracks on the same disc

Other tracks on other discs

6

Press · to start Program Play.

To cancel Program Play

Press CONTINUE.

Repeat Steps

2 and 4

3 and 4

2 through 4

PROGRAM

DISC/CAPS

TRACK/SPACE

Number
buttons

ENTER

CLEAR

CHECK

·

1

Press PROGRAM until the program number you
want (PROGRAM 1, 2 or 3) appears in the front
panel display.

2

Press DISC/CAPS.

(Continued)

PROGRAM1

CD2

*DISC-2O*

2 O

DISC

2O ALL 1

DISC

TRACK

STEP

PROGRAM1

CD2

*DISC-2O*

2 O

DISC

2O 3 1

DISC

TRACK

STEP

PROGRAM1

CD2

*DISC-2O*

2 O

DISC

2O 3 1

DISC

TRACK

STEP

PROGRAM1

CD2

*DISC-2O*

2 O

DISC

DISC-[ _]

Advertising