Siemens M1 User Manual
Page 53
52
gsm-m1-e.fm
GSM M1 Module, English: A24859-N4000-A100-1-7677
Technical reference section
26.2.96
This command refers to the GSM supplementary service CLIP (Calling Line Identifica-
tion Presentation) that enables a called subscriber to get the calling line identity (CLI)
when receiving a call.
The set command + CMP=<n> enables or disables the presentation of the CLI at the
M1. It has no effect on the execution of the service CLIP in the network. When enabled
+CLIP: <number>,<type> response is returned after every RING result code.
The read command +CLIP? gives the status of mode n and also triggers an interroga-
tion of the provision status of CLIP in the network.
AT+CLIP - Calling line identification presentation
AT+CLIP
Command
Result
AT+CLIP?
Displays mode n, mode m
AT+CLIP=?
Displays a list of supported modes n
AT+CLIP=<mode n>
Selects new mode
AT+CLIP?
Command
AT+CLIP?
Result Code
+CLIP:
<mode n>,<mode m>
<mode n>
n=[0,1]
1
enables extendet format
0
disables extendet format
<mode m>
m=[0,1,2]
0
CLIP not provisioned
1
CLIP provisioned
2
unknown