Speco Technologies CVC230HZ - Manual (Page 12)

4. You can enter up to 20 characters.
1) Move the cursor to the character entry field using the LEFT or RIGHT button.
2) Use UP, DOWN, LEFT, and RIGHT buttons to select a desired character.
CAM TITLE SETUP
ABCDEFGHIJKLMNO
PQRSTUVWXYZabcd
e f g h i j k l m n o p q r s
Tu v w x y z 0 1 2 3 4 5 6 7
89( ) < > - / # ! ? , .
  CLR POS END
3) Press the SET button to confirm selection of the blinking character. The character is
then saved, and the cursor in the entry field moves to the next position.
4) Repeat steps 1) through 3) until the desired name has been entered.
5. Select on screen position of the CAM TITLE.
1) Move the cursor to ‘POS’ and press SET button.
CAM TITLE SETUP
ABCDEFGHIJKLMNO
PQRSTUVWXYZabcd
e f g h i j k l m n o p q r s
Tu v w x y z 0 1 2 3 4 5 6 7
89( ) < > - / # ! ? , .
  CLR POS END
2) The CAM TITLE is displayed on the top-left of the monitor screen.
(Default position)
3) Select the position by using the 4-directional buttons, then press the SET button to confir
m
the position.
6. When completed, move the cursor to ‘END’ and press SET button.