Speco Technologies CVC230HZ - Manual (Page 19)

 IRIS: Set ‘IRIS’ to ‘AUTO’ or ‘MANUAL’. Position the indicator over ‘IRIS’ us
ing the UP or DOWN button and then select the desired iris mode usi
ng the LEFT or RIGHT button.
EXPOSURE SETUP
BRIGHTNESS
IRIS
SHUTTER
AGC
50 …………
AUTO
---
MIDDLE
- AUTO : The iris is automatically activated upon illumination.
- MANUAL : Manual iris configuration. Set ‘IRIS’ to ‘MANUAL’ using
the LEFT or RIGHT button and then press the SET button.
Increase or decrease iris level using the LEFT or RIGHT
button while verifying the changes on screen.
 SHUTTER: Control image brightness by adjusting shutter speed.
1. Position the indicator over ‘SHUTTER’ using the UP or DOWN button.
Then select the desired shutter mode (A.FLK, ESC, MANUAL) using
the LEFT or RIGHT button
EXPOSURE SETUP
BRIGHTNESS
IRIS
SHUTTER
AGC
50 …………
AUTO
---
MIDDLE
- A.FLK (NTSC: 1/100, PAL: 1/120): Flicker-free mode
- ESC: Automatic shutter speed setting (optimal)
- MANUAL: Manual shutter speed setting
2. If you choose ‘MANUAL’, select the optimal shutter speed.
In MANUAL mode, the optimal shutter speed needs to be designated.
Select from 1/60 to 1/120,000(NTSC) or from 1/50 to 1/120,000 (PAL)
* ‘Sens-up’ mode con be configured manually (2x to 128x).
Verify changes made to the shutter speed by referencing to changes in on screen
brightness.
3. Press the SET button to complete.