Speco Technologies CVC230HZ - Manual (Page 16)

FOCUS SETUP
MODE
ZOOM TRK
ZOOM SPEED
D-ZOOM
DISP ZOOM MAG
ONE-PUSH
ON
FAST
OFF
ON
┘
+ ONE PUSH: Focus is automatically adjusted just once, after zoom position is
changed. Select ‘ONE PUSH’ and press the SET button to conf
irm. Increase or decrease optical zoom (ZOOM) or digital zoom
(D-ZOOM) positions using the directional buttons while verifying
the changes on screen. Press the SET button once desired ima
ge quality is obtained.
+ MANUAL: Select ‘MANUAL’ and press the SET button to confirm. Increase
or decrease optical zoom (ZOOM) or digital zoom (D-ZOOM) p
ositions using the directional buttons while verifying the changes
on screen. Press the SET button once desired image quality is
obtained. Focus can be manually adjusted, independent of movi
ng zoom.
 ZOOM TRK: You can select to use ‘ZOOM TRK’. Move the arrow indicator to
‘ZOOM TRK’ using UP or DOWN button. Set ‘ZOOM TRK’ to on
using LEFT or RIGHT button.
FOCUS SETUP
MODE
ZOOM TRK
ZOOM SPEED
D-ZOOM
DISP ZOOM MAG
ONE-PUSH
ON
FAST
OFF
ON
┘
* FAST : To move zoom fast.
Configure zoom tracing speed using this feature. Position the
indicator over ‘ZOOM SPEED’ using the UP or DOWN button
and then set to desired mode using the LEFT or RIGHT butto
n
* SLOW : To move zoom slowly.