Hardware version, Date of production, Serial number – Spectrum Brands MI.20xx User Manual

Page 38: Maximum possible sample rate, Installed memory

Advertising
background image

38

MI.20xx Manual

Initialization

Programming the Board

Hardware version

Since all of the MI, MC and MX boards from Spectrum are modular boards, they consist of one base board and one or two (only PCI and
CompactPCI) piggy-back modules. This register SPC_PCIVERSION gives information about the revision of either the base board and the mo-
dules. Normally you do not need this information but if you have a support question, please provide the revision together with it.

If your board has a piggy-back expansion module mounted (MC und MI series boards only) you can get the hardwareversion with the follo-
wing register.

Date of production

This register informs you about the production date, which is returned as one 32 bit longword. The upper word is holding the information
about the year, while the lower byte informs about the month. The second byte (counting from below) is not used. If you only need to know
the production year of your board you have to mask the value accordingly. Normally you do not need this information, but if you have a
support question, please provide the revision within.

Serial number

This register holds the information about the serial number of the board. This numer is unique and should always be sent together with a
support question. Normally you use this information together with the register SPC_PCITYP to verify that multiple measurements are done with
the exact same board.

Maximum possible sample rate

This register gives you the maximum possible samplerate the board can run however. The information provided here does not consider any
restrictions in the maximum speed caused by special channel settings. For detailed information about the correlation between the maximum
samplerate and the number of activated chanels please refer th the according chapter.

Installed memory

This register returns the size of the installed on-board memory in bytes as a 32 bit integer value. If you want to know the ammount of samples
you can store, you must regard the size of one sample of your Spectrum board. All 8 bit boards can store only sample per byte, while all
other boards with 12, 14 and 16 bit use two bytes to store one sample.

The following example is written for a „two bytes“ per sample board (12, 14 or 16 bit board).

Register

Value

Direction

Description

SPC_PCIVERSION

2010

r

Board revision: bit 15..8 show revision of the base card, bit 7..0 the revision of the modules

Register

Value

Direction

Description

SPC_PCIEXTVERSION

2011

r

Board’s expansion module hardware revision as integer value.

Register

Value

Direction

Description

SPC_PCIDATE

2020

r

Production date: year in bit 31..16, month in bit 7..0, bit 15..8 are not used

Register

Value

Direction

Description

SPC_PCISERIALNO

2030

r

Serial number of the board

Register

Value

Direction

Description

SPC_PCISAMPLERATE

2100

r

Maximum samplerate in Hz as a 32 bit integer value

Register

Value

Direction

Description

SPC_PCIMEMSIZE

2110

r

Instaleld memory in bytes as a 32 bit integer value

SpcGetParam (hDrv, SPC_PCIMEMSIZE, &lInstMemsize);
printf ("Memory on board: %ld MBytes (%ld MSamples)\n", lInstMemsize /1024 / 1024, lInstMemsize /1024 / 1024 /2);

Advertising