Spectrum Brands MI.20xx - Manual (Page 8)

8 MI.20xx Manual
Additional options Introduction
Additional options
Extra I/O (Option -XMF)
With this simple-to-use enhancement
it is possible to control a wide range
of external instruments or other
equipment. Therefore you have 24
digital I/O and the 4 analog outputs
available.
The asynchronous I/Os of the extra
I/O option are useful if an external
amplifier should be controlled, any
kind of signal source must be pro-
grammed, an antenna must be adju-
sted, a status information from
external machine has to be obtained
or different test signals have to be
routed to the board.
The additional inputs and outputs
are mounted on an extra bracket.
The figure shows the allocation of the two connectors.
The shown option is mounted exemplarily on a board with two modules. Of course you can also combine this option as well with a board
that is equipped with only one module.
It is not possible to use this option together with the star hub or timestamp option, because there is just space for
one piggyback module on the on-board expansion slot.
Extra I/O (Option -XIO)
With this simple-to-use enhancement
it is possible to control a wide range
of external instruments or other
equipment. Therefore you have 16
digital I/O and the 4 analog outputs
available.
The asynchronous I/Os of the extra
I/O option are useful if an external
amplifier should be controlled, any
kind of signal source must be pro-
grammed, an antenna must be adju-
sted, a status information from
external machine has to be obtained
or different test signals have to be
routed to the board.
The additional inputs and outputs
are not mounted on an extra brak-
ket, but are available on an internal connector. The figure shows the position of this connector on the bottom side of the extra I/O piggy-back
module.
The shown option is mounted exemplarily on a board with two modules. Of course you can also combine this option as well with a board
that is equipped with only one module.
It is not possible to use this option together with the star hub or timestamp option, because there is just space for
one piggyback module on the on-board expansion slot.