Press enter – Sony DVP-NS705V EN User Manual

Page 30

Advertising
background image

30

7

Press X/x to select the setting that
matches your TV type.

If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 76)

If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN

(page 76)

8

Press ENTER.

The Setup Display for selecting the type
of video signal output from the LINE 1
(RGB)-TV* jack appears.

9

Press X/x to select the type of
signal you want to output from the

LINE 1 (RGB)-TV* jack.

Video signals
VIDEO (page 76)

S video signals
• S VIDEO (page 76)

RGB signals
• RGB (page 76)

* LINE (RGB)-TV for DVP-NS705V

10

Press ENTER.

The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.

11

Press X/x to select the type of

jack (if any) you are using to
connect to an amplifier (receiver),

then press ENTER.

Choose the item that matches the audio
connection you selected on pages 24 to
27 (

through

).

• If you connect just a TV and nothing

else, select “NO.” Quick Setup is
finished and connections are complete.

• Select “LINE OUTPUT L/R

(AUDIO).” Quick Setup is finished and
connections are complete.

• Select “DIGITAL OUTPUT.” The Setup

Display for “DOLBY DIGITAL” appears.

or both

and

• Select “DIGITAL & 5.1CH OUTPUT.”

The Setup Display for “DOLBY
DIGITAL”appears.

12

Press X/x to select the type of

Dolby Digital signal you wish to

send to your amplifier (receiver).

Choose the signal that matches the audio
connection you selected on pages 25 to
27 (

through

).

• D-PCM (page 79)

SCREEN SETUP

TV TYPE:
SCREEN SAVER:
BACKGROUND:

16:9

4:3 LETTER BOX

LINE:

4:3 PAN SCAN

16:9

SCREEN SETUP

TV TYPE:
SCREEN SAVER:
BACKGROUND:

16:9

ON

JACKET PICTURE

LINE:

VIDEO

VIDEO

S VIDEO

RGB

YES

NO

Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.

LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT

A

D

A

B-1

C-1

B-2

C-2

D-2

D-1

D-1

D-2

B

D

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

DOLBY DIGITAL:
MPEG:

OFF

STANDARD

AUDIO FILTER:

SHARP

ON

DOWNMIX:

DOLBY SURROUND

D-PCM
D-PCM

48kHz/96kHz PCM:

48kHz/16bit

DTS:

DOLBY DIGITAL

B-2

C-2

Advertising
This manual is related to the following products: