Sony DVP-NS705V EN - Manual (Page 32)

32
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 25 to
27 (
through ). Each of these is the
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 74 for using the Setup Display.
Audio Connection (pages 24 to 27)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 79).
• If the sound distorts even when the volume
is turned down, set “AUDIO ATT” to “ON”
(page 78).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 79).
• Set “DIGITAL OUT” to “ON” (page 79).
• Set “48kHz/96kHz PCM” to “96kHz/24bit,”
only if you connect an amplifier (receiver)
that conforms to the 96 kHz sampling
frequency (page 80).
• Set “DISTANCE,” “BALANCE,” and
“LEVEL” according to the connected
speakers (page 82).
• If the sound distorts even when the volume
is turned down, set “AUDIO ATT” to “ON”
(page 78).
B D
A
B-1 C-1
B-2 C-2 D-2
D-1