Sony GDM-17SE2T5 - Manual (Page 6)

6
See the given pages for further description.
Front Rear
1 RESET button (page 11)
Press to reset the adjustment data to the factory-preset
levels.
2 OPTION button (page 9-11)
Press to set the option items, such as control lock and
color temperature.
3 CONV (convergence) button (page 9)
Press to adjust the vertical and horizontal convergence.
4 GEOM (geometry) button (page 8)
Press to adjust the rotation and pincushion.
5 SIZE (picture size) button (page 8)
Press to adjust the vertical and horizontal picture size.
6 CENT (center) button (page 7)
Press to adjust the vertical and horizontal picture
position.
7 ¨ (brightness) –/+ ( . / > ) buttons (page 7-10)
Press to adjust the brightness.
–/+( . / > ) buttons also adjust the each item.
8 > (contrast) –/+ ( ? / / ) buttons (page 7-10)
Press to adjust the contrast.
–/+ ( ? / / ) buttons also adjust the each item.
9 POWER SAVING indicator (page 12)
Lights up when the monitor is in the Power Saving
Modes.
0 u power switch and indicator (page 12)
Press to turn the monitor on or off. The indicator lights
up when the monitor is turned on.
! ¡ AC IN connector
Plug in an AC power cord.
!™ Video input 1 connector (HD15)
The cable accepts RGB video signals (0.714 Vp-p,
positive) and SYNC signals.
Pin No.
1
2
3
4
5
6
7
Signal
Red
Green
(Composite
Sync on Green)
Blue
—
DDC Ground*
Red Ground
Green Ground
Signal
Blue Ground
DDC + 5V*
Ground
—
Bi-Directional
Data (SDA)*
H. Sync
V. Sync
Data Clock(SCL)*
Pin No.
8
9
10
11
12
13
14
15
* Display Data Channel (DDC) Standard by VESA
! £ Video input 2 connectors (5 BNC)
The cable accepts RGB video signals (0.714 Vp-p,
positive) and SYNC signals.
Functions of Controls
RESET OPTION CONV GEOM SIZE CENT POWER
SAVING
2 (BNC)
1
(HD15)
R G B HD VD
5 4 3 2 1
8 7 6
15 14 13 12 11
10 9