Sony GDM-17SE2T5 - Manual (Page 8)

8
Adjusting the Picture Size
The adjustment data becomes the unique setting for the
input signals received.
1
Press the SIZE button.
The “SIZE” OSD (On Screen Display) appears.
2
For vertical adjustment
Press the
¨ . / > buttons.
. . . . to diminish
> . . . to enlarge
For horizontal adjustment
Press the
> ? / / buttons.
? . . . to diminish
/ . . . to enlarge
To erase the “SIZE” OSD, press the SIZE button again.
The “SIZE” OSD automatically disappears 10 seconds after
you release the buttons.
To reset, press the RESET button while the OSD is on.
Adjusting the Picture Rotation
The adjustment data becomes the common setting for all
input signals received.
1
Press the GEOM button.
The “GEOMETRY” OSD (On Screen Display) appears.
2
Press the ¨ . / > buttons.
. . . . to rotate counterclockwise
> . . . to rotate clockwise
To erase the “GEOMETRY” OSD, press the GEOM button
again.
The “GEOMETRY” OSD automatically disappears 10
seconds after you release the buttons.
To reset, press the RESET button while the OSD is on.
Adjusting the Pincushion
The adjustment data becomes the unique setting for the
input signals received.
1
Press the GEOM button.
The “GEOMETRY” OSD (On Screen Display) appears.
2
Press the > ? / / buttons.
? . . . to diminish the picture sides
/ . . . to expand the picture sides
To erase the “GEOMETRY” OSD, press the GEOM button
again.
The “GEOMETRY” OSD automatically disappears 10
seconds after you release the buttons.
To reset, press the RESET button while the OSD is on.
Adjustments
0 23
SIZE
SIZE
0 23
GEOMETRY
GEOM
0 23
GEOMETRY
GEOM