Savin SLP 38c SLP38C - Manual (Page 14)

Windows 95/98/Me Configuration
8
2
Note
❒ Auto Run might not automatically work with certain OS settings. In this
case, launch "INSTTOOL.EXE" located on the CD-ROM root directory.
C
Follow the instructions on the screen.
D
Select [Typical] installation, and then click [Next].
E
Follow the instructions on the screen.
F
Click [Add] when the "Select Port" dialog box appears.
G
Select [network printer], and then click [OK].
H
Double-click the computer name you want to use as a print server in the
"Browse for Printer" window.
I
Select the printer you want to use, and then click [OK].
J
After confirming that the location for the selected printer shown, click
[Next]
.
K
Follow the instructions on the screen.
L
If you use a User Code, configure it.
M
Restart the computer after the installation is complete.
N
Set up the options with the printer driver.
Note
❒ The procedure to specify the "User Code" may differ depending on the
printer language.
• RPCS
You can specify the "User Code" when installing the printer driver. You
cannot register or edit the "User Code" from the printer driver dialog
box. To change the "User Code", you must uninstall the printer driver
then register the new "User Code" during the re-install process.
• PCL 5c/PostScript3
You can specify the "User Code" with the printer driver properties after
installing the printer driver. See the Help file for the printer driver.
❒ You must set up the options when the bidirectional transmission is dis-
abled. For more information about the status of the bidirectional transmis-
sion, see P.17 “The conditions of the bidirectional transmissions”
Reference
For more information about settings for options, see P.17 “Setting up Op-
tions”.