Savin SLP 38c SLP38C - Manual (Page 33)

Printing without Using a Print Server
27
3
Printing with a Standard TCP/IP Port
Preparation
Select [Typical] installation when you use the printer with Standard TCP/IP
port.
[Typical]
installation installs the PCL 5c and RPCS printer driver.
Installing the Printer Driver
A
Close all applications that are running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer will start by Auto Run.
Important
❒ Never have two versions of the same printer driver installed on your sys-
tem at the same time. When upgrading to a new version of the printer driv-
er, delete the old version, and then install the new one.
Note
❒ Auto Run might not automatically work with certain OS settings. In this
case, launch "INSTTOOL.EXE" located on the CD-ROM root directory.
C
Follow the instructions on the screen.
D
Select [Typical] installation, and then click [Next].
E
Follow the instructions on the screen.
F
Select [Standard TCP/IP] when the "Select Port" dialog box appears, and then
click [Next].
G
Click [Next] in the "Add Standard TCP/IP Printer Port Wizard" window.
H
Type the printer name or IP address in the "Printer Name or IP Address"
box.
I
Click [Finish] in the "Add Standard TCP/IP Printer Port Wizard" window.
J
Confirm that the selected port has been displayed in the "Port" box, and
then click [Next].
Note
❒ During installation, the [Digital Signature Not Found] dialog box may appear.
In this case, click [Yes] to continue the installation.