Savin SLP 38c SLP38C - Manual (Page 39)

33
4. Windows NT 4.0
Configuration
Printing with a Print Server
Printing with a Windows 2000 or Windows NT 4.0 Print Server
This section describes the procedures for setting up a client in a network that
uses Windows 2000 Server, Windows 2000 Professional, Windows NT 4.0 Server
or Windows NT 4.0 Workstation as a print server.
To print from Windows NT 4.0, you must install the printer driver and change
the printer port to the print server.
A
Close all applications that are running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer will start by Auto Run.
Important
❒ Never have two versions of the same printer driver installed on your sys-
tem at the same time. When upgrading to a new version of the printer driv-
er, delete the old version, and then install the new one.
Note
❒ Auto Run might not automatically work with certain OS settings. In this
case, launch "INSTTOOL.EXE" located on the CD-ROM root directory.
C
Follow the instructions on the screen.
D
Select [Typical] installation, and then click [Next].
Windows 2000
Windows NT 4.0
Print Server
Windows NT 4.0