Sennheiser SK 300 - Manual (Page 15)

Using the bodypack transmitter
14
̈
Exit the operating menu.
̈
Slide the MUTE switch
·
to the left, to the position
MUTE .
The bodypack transmitter reacts as indicated in the
table.
The current state of the muting function or the RF signal is
displayed on the display panel of the bodypack transmitter.
An additional display of the muting function
appears on the receiver’s display panel when
• the pilot tone function is activated on both
bodypack transmitter and receiver
and, in addition,
• this display has been activated via the
“
Warnings ” menu item on the receiver (see the
instruction manual of the receiver).
Audio signal is muted
Transmitter’s display panel: “ MUTE ”
ቨ
is displayed
Receiver’s display panel: “ TX Mute ” is displayed *
* only when activated on the receiver (see previous
section)
Audio signal is activated (muting is deactivated)
Transmitter’s display panel: “ MUTE ”
ቨ
is not displayed
Receiver’s display panel: “ TX Mute ” is not displayed
RF signal is deactivated
Transmitter’s display panel: transmission icon
ብ
is not
displayed,
“
MUTE ”
ቨ
is displayed
Receiver’s display panel: “ RF Mute ” is displayed *
* only when activated on the receiver (see previous
section)
RF signal is activated
Transmitter’s display panel: transmission icon ብ is
displayed,
“
MUTE ”
ቨ
is not displayed
Receiver’s display panel: “ RF Mute ” is not displayed
MHz 531.375
ew300 G3
MUTE P
AF
ብ
ቨ