Sennheiser SK 300 - Manual (Page 5)

The SK 300 G3 bodypack transmitter
4
For an overview of the frequency presets, please refer to the
supplied frequency information sheet. Updated versions
of the frequency information sheet can be downloaded
from the SK 300 G3 product page on our website at
www.sennheiser.com.
The frequency banks “ U1 ” to “ U6 ” allow you to freely select
and store frequencies. It might be that these frequencies
are
not intermodulation-free.
Areas of application
The bodypack transmitter can be combined with the
EM 300 G3 rack-mount receiver.
The EM 300 G3 rack-mount receiver is available in the same
UHF frequency ranges and is equipped with the same
frequency bank system with factory-preset frequencies.
This has the advantage that
• a transmission system is ready for immediate use after
switch-on,
• several transmission systems can be operated simulta-
neously on the preset frequencies without causing
intermodulation interference.
Overview of the microphones and line cables:
Transmitter Combinable with Receiver
SK 300 G3 • Clip-on micro-
phones:
ME 2, ME 4
• Headmics:
ME 3
• Line cable:
CL 2
EM 300 G3
Microphone/
line cable Microphone
type
Pick-up pattern
ME 2 clip-on
microphone pre-polarized
condenser
microphone – omni
ME 4 clip-on
microphone – cardioid
ME 3 headmic – cardioid
CL 2 line cable – –
531.375
SKM300
ew300 G3 B.Ch: 20.24 PEAK
MUTE
EQ
+ 12dB
-10 0 40
30
20
10
-20
-30
-40
AF RF
MHz
P