Sennheiser SK 300 - Manual (Page 27)

Adjusting settings via the operating menu
26
Adjusting the contrast of the display panel –
“LCD Contrast“
You can adjust the contrast of the display panel in 16 steps.
Resetting the settings made in the operating menu –
“Reset”
When resetting the settings made in the operating menu,
only the selected settings for the pilot tone and for the
frequency banks “
U1 ” to “ U6 ” remain unchanged. For an
overview of the factory-preset default settings, refer to the
supplied frequency information sheet.
Displaying the software revision – “Software Revision”
You can display the current software revision of the body-
pack transmitter.
̈
For information on software updates, visit the
SK 300 G3 product page at www.sennheiser.com.
Advanced Menu
Reset Yes
Reset
Select the desired
setting; apply the
setting Call up “Reset”
“Stored”