Sennheiser SK 300 - Manual (Page 22)

Adjusting settings via the operating menu
21
The following figures are a guide to the best settings:
Selecting the frequency bank and the channel manually –
“Frequency Preset”
Overview of the frequency banks and channels:
Entering a name – “Name”
Via the “ Name ” menu, you can enter a freely selectable
name (e.g. the name of the performer) for the bodypack
transmitter.
Transmission situation Sensitivity setting
Loud music/vocals
−30 to −21 dB
Presentations
−21 to 0 dB
When you are in the “ Frequency Preset ” menu item,
the RF signal is deactivated.
Frequency
bank
Channels Type
“ 1 ” to “ 20 ” up to 24 per
frequency
bank System bank:
frequencies are factory-
preset
“ U1 ” to “ U6 ” up to 24 per
frequency
bank
User bank:
frequencies are freely
selectable
When setting up multi-channel systems, please
observe the following:
Only the factory-preset frequencies within one
frequency bank are intermodulation-free (see
page 27).
Bodypack transmitter and receiver of a transmission
link have to be set to the same frequency.
̈
It is vital to observe the notes on frequency
selection on page 27.
Menu
B.Ch: 1. 1
Frequency Preset B.Ch:
Frequency Preset
1 . 1 B.Ch:
Frequency Preset
20. 1
518.200 MHz 531.375 MHz
Call up “Frequency
Preset” Select the frequency
bank and confirm Select the channel;
store the setting
“Stored”
Menu
Lichael
Name
Name Name
L ichael M i chael
Call up “Name” Enter a character
and confirm Enter a character;
store the setting
“Stored”