Gearbox leaking damaged oil seal. replace seal, No oil seal. install oil seal, Oil too light. use ep140 – Servis-Rhino CY84 User Manual
Page 133: Bent shaft. replace oil seal and shaft, Oil seal race rough. replace shaft or repair race, Oil seal installed wrong. replace seal, Of seal, Bearings loose. adjust bearings, Vent plug stopped up. open vent plug, Oil level too high. drain oil to proper level
OPERATION
CY84 03/08
Operation Section 4-45
© 2008 Alamo Group Inc.
OPERA
T
ION
Gearbox Leaking
Damaged Oil Seal.
Replace Seal.
No Oil Seal.
Install Oil Seal.
Oil too light.
Use EP140.
Bent Shaft.
Replace Oil Seal and Shaft.
Oil Seal Race rough.
Replace Shaft or repair Race.
Oil Seal installed wrong.
Replace Seal.
Oil Seal not sealing in the housing.
Replace Seal or use a sealant on O.D.
of Seal.
Bearings loose.
Adjust Bearings.
Vent Plug stopped up.
Open Vent Plug.
Oil level too high.
Drain oil to proper level.
Gasket damaged.
Replace Gasket.
Bolts loose.
Tighten Bolts.
Driveline Integral Shields
Integral Shields deformed.
Replace Shield.
Rattling or Not Turning Freely
Nylon Bearing worn.
Replace Nylon Bearing.
Rapid Clevis Wear
Washer not used.
Install washers above and
below drawbar.
Clevis Bending or Spreading
Using Pin or Bolt not tightened.
Use 1” grade 5 or 8 Bolt & tighten Nut.
Open.