Servis-Rhino CY84 - Manual (Page 77)

INTRODUCTION
CY84 03/08 Introduction Section 2-3
© 2008 Alamo Group Inc.
INTRODUCTION
Pull-Type Model
These mowers are available in lift-type and pull-type. These rugged Mowers are designed for medium-duty
work. They can mow pastures, cut brush up to 4" in diameter, and control grass and weeds on highways or
industrial sites.
For Non-Agricultural use, OSHA, ASAE, SAE, and ANSI standards require the use of Chain
Guards or Solid Skirts at all times. The Cutter manufacturer strongly recommends the use of
Chain Guards or Solid Skirts for Agricultural purposes as well, to reduce the risk of property
damage, serious bodily injury, or even death from objects thrown out by or from contact with
the Cutting Blades.
The 84" Lift-Type machine requires a minimum of 60 HP with adequate front end weight.
At least 20% or the tractor’s weight must be on the front tires with the implement lifted to
provide adequate traction for safe steering under good conditions. Slow down on hills, rough
terrain, and curves.
Front and rear, and left and right are determined by the normal direction of travel (the same as on your
automobile).