Servis-Rhino CY84 - Manual (Page 91)

OPERATION
CY84 03/08 Operation Section 4-3
© 2008 Alamo Group Inc.
OPERA
T
ION
1. Standard Equipment and Specifications
CY84
Horsepower Required (Min.):
Lift 60 HP
Pull 30 HP
Safety Deflector Rubber Belting
Cutting Width 84”
Overall Width 90-3/8”
Overall Length:
Lift 125”
Pull 152-1/2”
Cutting Height 2-3/8” - 16-1/2” Min.
Self-Leveling Height Adjustment Ratchet Jack or Hydraulic Cylinder (Pull)
Jack Stand Std. (Pull)
Base Unit Weight (Approx.) 1869 lbs.
Hitch CAT II-III Q.H. or Pull
Blade Carrier H.D. Pan
Blades 1/2” x 4” Updraft
Gearbox Rating:
540 RPM 150 HP*
1000 RPM 150 HP*
Output Shaft Diameter 2-3/8”
Blade Tip Speed:
540 RPM 16,328 FPM
1000 RPM 15,994 FPM
Cutting Capacity (Max.) 3-1/2”
Driveline Size Cat 5
Driveline Protection Slip Clutch
Deck Thickness 3/16”
Side Skirt 1/4” x 10-3/4”
Tires & Wheel:
Lift Single or Dual, Laminated
Pull Laminated Foam-Filled Used Airplane,
Used Airplane,
Implement, 15” Rim
Safety Tow Chain Std. (Pull)
*Ratings based on actual field performance.