Speco Technologies 4HD - Manual (Page 11)

11
1. Name and Function
1-1. Front Panel
The following information will help you to operate the front panel controls.
Figure 1.1.1. Front panel
Table2.1.1. Indication lamps
Name Description
POWER
LED light is on when power is applied to the system.
Green – Power On, Orange – Power Off
HDD LED light is on when the system is recording video data.
ALARM LED light is on when alarm sensor(s) is/are triggered or motion is detected.
NETWORK LED light is on when client is connected to the system through the network.
CH1, 2, 3, 4 LED light is on when the channel is recorded.
Table 2.1.2. Front panel buttons
Name Description
DISPLAY Press to toggle the screen mode. (Full or Quad)
SEQ Press to start auto sequencing of the screen in full screen mode. (Toggle)
AUDIO Press to set the audio output mode. (Mute, 1CH to 4CH)
PTZ Press to control PTZ operation
SETUP Press to launch SETUP menu.
ALARM Press to set the alarm output mode. (On or Off)
BACKUP Press to start operations involving archiving in live or playback mode.
SEARCH
Press to go to the search menu.
Event search /Time line search /Log /Archive search
ESC
Press for temporal storage of the changed value or to return to previous menu
screen.
Press to move up the menu items in setup mode and to select camera 1 in live
mode. It is also used as the number 1 when entering password.