Speco Technologies 4HD - Manual (Page 23)

23
FULL ZONE: The motion sensor is active on the whole screen.
PARTIAL ZONE: The motion sensor is active in the set detection frame.
Select the sensor detection position using the control button (
◀ ▲ ▶ ▼
) and press the SEL button.
Then the color of the position which is selected will be changed. Press ESC button to return to the DEVICE
setup menu.
Figure 3.4.4. Motion Zone Selection Screen
3-5. Setup
– Storage Mode
Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select
STORAGE icon and press SEL button to enter the setup menu item. Navigate through the menu items
using the control button (
◀ ▲ ▶ ▼
) and change the value of the menu item using the control button (
◀
▲ ▶ ▼
). To return to setup menu screen, press the ESC button.
Figure 3.5.1. STORAGE Setup Screen