SIGMA EQ Station - Manual (Page 11)

9
FRONT PANEL
CHANNEL SELECT wheel
Use the CHANNEL SELECT wheel to select which channel
to process. When more EQ Stations are connected in a
network, all channels can be accessed from any EQ
Station front.
RECALL
Press to initiate Recall operations. EQ station operates with
both individual Channel presets and global Scene presets.
STORE
Press to initiate Store operations. Both individual Channel
presets and Scene presets can be stored.
SETUP
Press to access settings such as: I/O configuration and
Network and Device information.
UTILITY
Via Utility you can setup various parameters such as UI
channel sync, LCD/LED light, MIDI, preset name,
configuration, Graphic EQ features, Framerate and
security.
CURSOR ARROW keys
Use the CURSOR keys to navigate in the control windows.
OK
Use OK to confirm operations when operating in the control
section.
ADJUST wheel
The ADJUST wheel is used to change parameter values.
etc.
ALL
When activated you have the possibility to adjust the
Graphic EQ on all channels at the same time. In a network
of multiple EQ Stations the Graphic EQ on all channels in
the network can be controlled simultaneously.
GROUP
With the Group function you can adjust the Graphic EQ on
a group of selected channels. All channels in a network
can be assigned to a group.
COPY/PASTE
The Copy/Paste function makes it possible to copy EQ
settings from one channel to another.
FLAT
In Parametric EQ: - Press and hold both the COPY and
PASTE buttons to flatten the EQ curve.
In Dynamic EQ: - Press and hold both COPY and PASTE
buttons to return parameters to default settings.
FREQUENCY / BANDWIDTH / GAIN
Fast access adjust knobs.
Note that in Dynamic EQ only the FREQUENCY knob is
relevant.