Quick setup reference – SIGMA EQ Station User Manual

Page 9

Advertising
background image

Cluster Auto Setup
Now to the easy part.
• Enter the Global page on any unit; select: “I/O Settings”

and press OK

• Select “Auto Setup” and press OK.

Depending on the configuration of each EQ Station the
channels are now assigned in the Cluster consecutively
and in the order defined by Device Numbers.

Example:
EQ Station with Device Number 1 : 4 channel version
EQ Station with Device Number 2 : 4 channel version
EQ Station with Device Number 3 : 8 channel version

Primarily channels are sorted by Device Number.
However, if the Device Numbers are identical in the
different units, the channels are sorted by Device
Name.

You have given the three EQ Stations Device number 1, 2
and 3 and performed a Cluster Auto setup on the Global
page on one of the units..

In the Cluster the channels are now assigned according to
the table below:

7

QUICK SETUP REFERENCE

If a Motofader 64 is connected to one of the EQ Stations, it
will be able to monitor and adjust Graphic EQ on all
available channels. The Motofader 64 can be connected to
the RS232 connection on any of the EQ Stations in the
network. If you have a network with 3 or more units, the
Motofader 64 should be connected to a unit in the middle
of the setup. This is to ensure optimal response between
EQ Station units and the Motofader 64.
Once connected and powered on the Motofader 64 will
access all available channels.
If you store a Scene preset, channel information from all
available channels will be stored and recalled in the EQ
Station where the preset is located.

Troubleshooting:
If you do not see the expected number of channels after an
“Auto Setup”:

- you have probably NOT given the EQ Stations different

device names, or

- you have not given the EQ Stations device numbers, or

- you have not given the EQ Stations unique TCP/IP

numbers, or

- the Subnet Mask is not the same on all units

Cluster Position

EQ Station
Device ID 1
Channels 1-2-3-4

1-2-3-4

EQ Station
Device ID 2
Channels 1-4

5-6-7-8

EQ Station 3
Device ID 3
Channels 1-8

9-10-11-12-13-14-15-16

Advertising